Heat Pump Upgrade Co
    Start Your System Design

    Intelligent Zone Control

    Ducted Heat Pump Zone Control Christchurch

    Comfort that responds room by room. Heat Pump Upgrade Co can integrate Mitsubishi Electric ZoneIQ or AirTouch 5 into compatible Mitsubishi Electric ducted systems, giving you greater control over temperature and airflow throughout your home.

    More Than On and Off

    More than turning rooms on and off

    A well-designed zoning system can do much more than simply open or close dampers. Different rooms experience different conditions because of sunlight, glazing, orientation, room size, occupancy, ceiling height and how the room is used.

    With the right sensors and controls, intelligent zoning can respond to these differences and manage airflow more effectively across the home.

    Good zoning starts with good airflow design.

    Heat Pump Upgrade Co designs the heat pump, ductwork, airflow and zoning strategy together. The controller is the final layer of a properly designed system — not a substitute for one.

    Mitsubishi Electric Integrated Control

    Mitsubishi Electric ZoneIQ

    ZoneIQ is Mitsubishi Electric's intelligent zoning solution for compatible Mitsubishi Electric ducted heat pump systems. Ideal for homeowners who value Mitsubishi Electric integration, room-by-room temperature control, intelligent airflow modulation, individual zone sensing and a streamlined Mitsubishi Electric control ecosystem.

    Compatible Mitsubishi Electric ducted heat pump systems. Compatibility is confirmed during system design.

    Up to 10 zones

    ZoneIQ can control up to 10 zones, allowing different rooms or areas to be managed according to how they are used.

    Individual zone temperature settings

    Each active zone can have its own selected temperature. The ducted heat pump still operates in one overall heating or cooling mode and does not simultaneously heat one room while cooling another.

    Temperature & humidity sensing

    Compatible ZoneIQ room sensors provide real-time temperature and humidity information to the ZoneIQ controller, helping the system respond to conditions throughout the home.

    Intelligent airflow adjustment

    ZoneIQ compares the measured temperature of each zone with its selected temperature. As a room approaches its target, airflow can automatically reduce, allowing conditioned air to be prioritised towards zones that still require heating or cooling.

    5% damper modulation

    Compatible ZoneIQ dampers can be adjusted in precise 5% increments, allowing airflow to be progressively modulated rather than operating only fully open or fully closed.

    Weekly scheduling

    ZoneIQ supports weekly scheduling with up to 10 operating patterns, allowing routines to be created around normal household activity.

    Mitsubishi Electric Wi-Fi Control

    With compatible Mitsubishi Electric Wi-Fi Control hardware, homeowners can manage their system and zones remotely from a compatible smartphone or tablet. Wi-Fi hardware is specified as part of the system design.

    Advanced Smart Climate Control

    AirTouch 5

    AirTouch 5 is an advanced third-party zoning and smart climate-control platform that can integrate with compatible Mitsubishi Electric ducted heat pump systems. Positioned for homeowners who want advanced technology, a premium touchscreen, extensive app control, more zones, sophisticated automation and smart-home integration.

    Compatible Mitsubishi Electric ducted heat pump systems. Compatibility is confirmed during system design.

    Up to 16 zones

    AirTouch 5 can control up to 16 zones, making it well suited to larger homes or systems requiring more independently managed areas.

    Intelligent Temperature Sensors

    Optional AirTouch Intelligent Temperature Sensors can monitor individual zones and allow temperature-based control rather than relying entirely on one central sensing point.

    Airflow control

    AirTouch 5 can manage individual zones by temperature or airflow percentage, depending on the system configuration.

    Touchscreen control

    The AirTouch 5 touchscreen provides a central interface for controlling the ducted heat pump, zones, temperatures, schedules and system settings.

    App control

    AirTouch 5 can be controlled remotely using the AirTouch app on a compatible smartphone or tablet.

    Geofencing

    Geofencing can use smartphone location to help manage the system when household members leave or return home.

    Temperature alerts

    AirTouch 5 can provide temperature alerts to help homeowners stay aware of conditions while away from home.

    Usage insights

    AirTouch Insights can help homeowners understand how the system is being used and identify opportunities to reduce unnecessary heating or cooling.

    Weather adaptation

    AirTouch 5 includes weather-adaptation features that can consider local conditions when managing comfort.

    Smart-home integration

    For customers wanting broader smart-home capability, AirTouch 5 can also integrate with compatible smart-home and voice-control platforms.

    Multiple systems

    AirTouch 5 can suit larger homes with more than one compatible ducted heat pump system, allowing centralised control through one interface.

    Comparison

    Which control system is right for your home?

    Both systems provide sophisticated room-by-room control. The right choice depends on your Mitsubishi Electric system, number of zones, smart-control requirements and how you want to interact with the system.

    FeatureMitsubishi Electric ZoneIQAirTouch 5
    Best suited toHomeowners wanting a Mitsubishi Electric integrated zoning solution.Homeowners wanting advanced smart control, more zones or broader automation.
    ZonesUp to 10Up to 16
    Individual temperature controlYesYes, with compatible sensors
    Temperature sensingYes, with compatible sensorsYes, with compatible sensors
    Humidity sensingYes, with compatible sensors—
    Automatic airflow modulationYesYes
    Damper modulation5% incrementsAirflow percentage control
    SchedulingYesYes
    Remote controlMitsubishi Electric Wi-Fi Control (compatible hardware required)AirTouch app
    Geofencing—Yes
    Temperature alerts—Yes
    Usage insights—Yes
    Weather adaptation—Yes
    Multiple compatible AC systems—Yes
    Smart-home integrationMitsubishi Electric ecosystemCompatible smart-home platforms
    Primary strengthDeep Mitsubishi Electric integration and intelligent airflow control.Advanced smart-home control and automation.

    The HPUC Difference

    The controller comes after the design.

    Intelligent zoning cannot compensate for an incorrectly designed ducted heat pump system. Before Heat Pump Upgrade Co specifies ZoneIQ or AirTouch 5, we consider room-by-room heating and cooling requirements, total system capacity, supply airflow, return airflow, duct sizing, branch sizing, diffuser selection, damper sizing, minimum airflow, static pressure, zone combinations and equipment compatibility. Then the controller is selected to suit the finished system design.

    We design the comfort system first. Then we choose the control platform that suits it.

    Two ways to take control

    ZoneIQ may suit you if:

    • you want a Mitsubishi Electric integrated control system
    • you require up to 10 zones
    • intelligent airflow modulation is a priority
    • you want temperature and humidity sensing
    • you prefer a streamlined Mitsubishi Electric control ecosystem

    AirTouch 5 may suit you if:

    • you want up to 16 zones
    • you want a large touchscreen
    • you want advanced app control
    • you want geofencing
    • you want temperature alerts
    • you want usage insights
    • you want smart-home integration
    • you have more than one compatible ducted system

    Heat Pump Upgrade Co will confirm the most appropriate controller once the home, heat pump system, duct design and control requirements are understood.

    System Design Flow

    From home to room-by-room comfort

    1. 01
      Home
    2. 02
      Room-by-room heat load
    3. 03
      Mitsubishi Electric system selection
    4. 04
      Airflow & duct design
    5. 05
      Zone strategy
    6. 06
      ZoneIQ or AirTouch 5
    7. 07
      Installation
    8. 08
      Commissioning
    9. 09
      Room-by-room comfort

    Commissioning

    Intelligent control needs proper commissioning

    A zone-control system should be commissioned as part of the completed ducted installation. Depending on the system, Heat Pump Upgrade Co may:

    Confirming damper operation

    Checking zone airflow

    Configuring airflow limits

    Confirming static pressure

    Verifying minimum system airflow

    Pairing temperature sensors

    Setting zone names

    Controller configuration

    Connecting compatible Wi-Fi systems

    Assisting with schedules

    Homeowner handover

    Not every item applies to every installation. Commissioning is tailored to the specified system.

    Frequently Asked Questions

    Zone control questions, answered

    What is the difference between ZoneIQ and AirTouch 5?

    ZoneIQ is Mitsubishi Electric's integrated intelligent zoning system for compatible Mitsubishi Electric ducted heat pumps. AirTouch 5 is an advanced third-party smart climate-control platform that can integrate with compatible Mitsubishi Electric systems and offers additional smart-control functionality.

    Which one does Heat Pump Upgrade Co recommend?

    There is no single best option for every home. Heat Pump Upgrade Co considers the Mitsubishi Electric equipment, number of zones, airflow requirements, system layout and level of smart control required before recommending ZoneIQ or AirTouch 5.

    Does Heat Pump Upgrade Co still only install Mitsubishi Electric heat pumps?

    Yes. Heat Pump Upgrade Co installs Mitsubishi Electric heat pumps exclusively. AirTouch 5 is an intelligent third-party zoning and control platform that can be integrated with selected compatible Mitsubishi Electric ducted systems.

    Can each room have a different temperature?

    Individual zones can have their own temperature settings when appropriately configured. However, a single ducted heat pump still operates in one overall heating or cooling mode and does not simultaneously heat one room while cooling another.

    How many zones can ZoneIQ control?

    Up to 10 zones.

    How many zones can AirTouch 5 control?

    Up to 16 zones.

    Does ZoneIQ automatically control airflow?

    Yes. ZoneIQ can automatically adjust compatible zone dampers according to room temperature requirements, including modulation in 5% increments.

    Can AirTouch 5 work with Mitsubishi Electric?

    Yes, AirTouch 5 can integrate with selected compatible Mitsubishi Electric ducted heat pump systems. Compatibility varies by model and must be confirmed before specification.

    Can zoning save energy?

    Intelligent zoning can help reduce unnecessary heating and cooling by allowing unused areas to be switched off and by reducing airflow to rooms that have reached their selected temperature. Actual energy use depends on the home, system design, settings and how the system is operated.

    Can ZoneIQ or AirTouch 5 be retrofitted?

    Possibly. Existing systems need to be assessed for equipment compatibility, duct design, dampers, wiring, airflow, static pressure and available access.

    Heat Pump Upgrade Co designs the system. ZoneIQ or AirTouch 5 provides the control.

    If you're planning a ducted heat pump, intelligent zone control can be designed in from the start. The right controller is specified around your home, your Mitsubishi Electric system and how you live.